Panasonic AW-HS50E Operating Instructions Manual

Also see for AW-HS50E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AW-HS50E Operating Instructions Manual Manual pdf 32 page image

31 (E)4. SpecificationsInputs 5 video linesSDI 4 signal lines: SDI IN 1 to SDI IN 4DVI-D 1 signal line: DVI INOutputs 3 video lines, 4 outputsSDI 2 signal lines: SDI OUT 1, SDI OUT 2(Only the SDI OUT 1 signals are split into two)DVI-D 1 signal line: DVI OUTSignal formats SD 480/59.94i, 576/50iHD 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF, 1080/23.98PsFSignal processing Y:Cb:Cr 4:2:2, 10 bit (8 bits for frame memory)RGB 4:4:4, 8 bitME number 1MESDI inputs HD: Serial digital component (SMPTE 292M)SD: Serial digital component (SMPTE 259M)4 signal lines: SDI IN 1 to SDI IN 4HD: SMPTE 292M (BTA S-004B) standard complied with• 0.8 V [p-p] 10 % (75 )• Input return loss More than 15 dB (5 MHz to 1.5 GHz)• Automatic equalizer 100 m (when 5C-FB cable is used)SD: SMPTE 259M standard complied with• 0.8 V [p-p] 10 % (75 )• Input return loss More than 15 dB (5 MHz to 270 MHz)• Automatic equalizer 200 m (when 5C-2V cable is used)DVI-D input Digital RGB (Vertical frequency: 60 Hz):XGA (1024  768), WXGA (1280  768), SXGA (1280  1024),WSXGA+ (1680  1050), UXGA (1600  1200), WUXGA (1920  1200)Digital RGB: 1080/50p, 1080/59.94p Analogue input signals are not supported.