-11-For details on operation and adjustment, refer to theoperating instructions for the camera.(1) Switch on the individual devices.(2) Adjust lens flange-back.• Flange-back adjustment is necessary if you areusing the camera for the first time, or if the lens hasbeen changed.• A long charge time makes adjustment difficult. It isrecommended, therefore, that you adjust it after set-ting the charge time to OFF in a bright place (Seepage 13.).(3) Set the charge time according to the intensity ofillumination of the object you are shooting.(See page 13.)(4) Adjust the lens iris and focus.(5) Adjust the white balance.• It is necessary if you are using the camera for thefirst time, or if you haven’t used it for a long time.• It is also necessary if a change has been made inthe lighting conditions or light intensity.• Once adjusted, the white balance does not need tobe adjusted again unless the conditions of use arechanged.(6) Adjust the black balance.• It is necessary if you are using the camera for thefirst time, or if you haven’t used it for a long time.• It is also necessary if the ambient temperature hasconsiderably changed or at the turn of a season.• Once adjusted, the black balance does not need tobe adjusted again unless the conditions of use arechanged.• After inserting the card AW-PB303, it takes a longertime for black balance adjustment because of theblack balance correction that takes place duringstorage operation.(7) Shoot the object.(After using the camera, switch off the individualdevices.)• To change the camera settings according to the useand conditions, refer to the operating instructions forthe camera.• To change the charge time set, see page 13.OPERATING PROCEDURES