Panasonic AW-PH405N Operating Instructions Manual

Contents

Panasonic AW-PH405N Operating Instructions Manual Manual pdf 13 page image

1Installation Concerning the safety modesThis unit comes with two safety modes which are designed to safeguard the user and others from injury and to prevent damageto the pan-tilt head.1. Mode for ensuring safety in the case of collisionsWhen the rotary arm of the pan-tilt head or some other unit installed on the head keeps colliding with an obstruction or aperson (approx. 6 seconds when the head rotates at 45 degrees per second), the mode for ensuring safety in the case ofcollisions is established.In this mode, only the rotation of the head in the direction of the collision is stopped. In the case of a low-speed collision, it will take longer for the safety mode to be established.The mode for ensuring safety in the case of collisions is released by bringing the joystick of the pan-tilt head controller(such as the AW-RP655) back to its center position. A poor weight balance may cause the mode for ensuring safety in the case of collisions to be established.Depending on the prevailing conditions, it may be necessary to adjust the balance, in which case consult your dealer.2. Mode for ensuring safety in the case of troubleWhen the pan-tilt head has detected trouble, the mode for ensuring safety in the case of trouble is established.In this mode, the up/down and left/right rotation of the head is stopped.The mode for ensuring safety in the case of trouble is released by first pressing the POWER ON/OFF switch to turn off thepower and then by pressing the switch again to turn the power back on. If the mode for ensuring safety in the case of trouble is established frequently, it may mean that the pan-tilt head ismalfunctioning. Consult your dealer.