51Web Live Screen OperationYou can display images from the camera on a personal computer and perform camera operations, such as pan, tilt,zoom, and focus control.(1)(2)(3)(4)(5) (6) (7)Name Function(1) Live/Setup Click [Live] to switch to live screen. Click [Setup] to switch to setup screen.(2) RTMP Setup for uploading the camera’s live view to the broadcasting platform (ex: YouTube).Click [Start] button to start uploading the live image to pre-registered broadcastingplatform. When RTMP starting, the start button will turn into stop button.To stop, click [Stop] buttonTo setup RTMP, please refer “RTMP setting” section.(3) OSD Menu Operations : Use this to select whether the camera’s on- screen displays are to beshown.:: It cancels the selection of the setting which is being changed. It restoresthe pre-change setting.[Note] On-screens displays are not displayed on JPEG images on web screens.(4) Power : Turn the unit on.: Set the unit to Standby mode.In the Standby mode, all the buttons on the live screen except for the [Power ON]button and [Standby] button are disabled.[Note]If [Power ON] or [Standby] is selected too quickly, the status selected and the displayshown may not correspond. In a case like this, follow the steps below to restore thecorrect status display: For Windows:Press the [F5] key on the keyboard of the personal computer.For Mac:Press the [Command] + [R] keys on the keyboard of the personal computer.The pan/tilt position return to the place just before entering STANDBY mode whenreturning from STANDBY mode to POWER ON mode.If the power is turned off, the pan/tilt position returns to the initial state.The items are selected using the [▲] [▼] [] [] buttons.If a selected item has a sub menu, this sub menu is displayed bypressing the [OK] button.