5 3PositionerUsed to set the key positions.Rotary encoders [R1 ~ R4]Used to adjust the video levels and modify settings.Audio faders [A1 ~ A4]Used to adjust the audio levels.ESCUsed to cancel the setting panel.DIGUsed to switch to the manual digitizer.P1 ~ P4Used to switch to the clip editor.SEQUsed to switch to the sequence editor.UNDOUsed to undo the operation performed immediatelybefore.REDOUsed to redo the operation which was undone by“UNDO”.TABUsed in the same way as the “TAB” key on akeyboard. It jumps ahead to the next item.HOME/ENDUsed to jump to the start or end point (toggleoperation) of a sequence.GOTO/SEARCHUsed to jump to a mark in or out point (toggleoperation).ZOOM IN (ZOOM OUT)Used to zoom in on (magnify) the time line. Used tozoom out when it is pressed while “SHIFT” is helddown.DIVIDE (MARK CUE)Used to divide a clip.REPLACE/ASSEM (EXCHANGE)Used to paste (replace) clips into a sequence. WithRecord To Video, it switches to the assemble mode.INSERT/INSERTUsed to paste (insert) clips into a sequence. WithRecord To Video, it switches to the insert mode.DELETE/IMMED (BS)Used to delete clips. With Record To Video, itswitches to the immediate mode.When it is pressed while “SHIFT” is held down, thetwo keys function as the backspace key.REMOVE/REC (EXIT)Used to remove clips (without moving the followingclips forward to close up the gaps left). With RecordTo Video or the batch digitizer, it starts recording.When it is pressed while “SHIFT” is held down, thewindow with the focus is closed.Wipe leverUsed to set wipe or the DVE preview or learn setting.PLAYUsed to play a tape in an external VCR when thetime line or clips are to be played.PREVUsed to preview wipe or DVE.Used to rewind the tape in the external VCR.Used to advance the tape in the external VCR frameby frame (in the reverse direction)./STBYUsed to set the external VCR to the still mode. Whenit is pressed while “CTRL” is held down, the externalVCR is switched between the standby ON and OFFmode.