Chapter 212 Getting StartedSetting Date and TimeThe standby display shows the current date and time, as well as the day ofthe week. You can adjust these settings if necessary.Note: You also have the option of turning the Date/Time displayOn or Off. See “Standby Screen” on page 52 for information.Adjusting Date and Time Settings1 From standby, press (MENU) to enter the Main Menu.2 Scroll to Phone Settings. Press (OK).3 Scroll to Time Settings. Press (OK).4 Press (OK) to select Date/Time.• The currently set date and time are displayed with the cursor over thefirst digit of the month.• You can change the date/time by using and to switch betweendate and time and and to scroll across the digits.5 When the cursor is over a digit you want to change, press the digit keyfor the number you want in its place.• You can switch from AM to PM by pressing when your cursor is onAM or PM on the display.• If you enter an invalid date or time, the display prompts you to enteranother date/time.6 When you are satisfied with the date/time setting, press (OK).Changing the Date Format1 From standby, press (MENU) to enter the Main Menu.2 Scroll to Phone Settings and press (OK).3 Scroll to Time Settings and press (OK).4 Scroll to Date Format and press (OK).• The display lists MM/DD/YYYY (American dateformat) and DD/MM/YYYY (European dateformat).• You can press the left arrow to go back to theprevious screen.5 Scroll to the format you prefer and press (OK).Selecting 24-hour or 12-hour Mode1 From standby, press (MENU) to enter the Main Menu.2 Scroll to Phone Settings and press (OK).3 Scroll to Time Settings and press (OK).4 Scroll to 24/12 Mode and press (OK).• The 24/12 Mode menu is displayed5 To change the current mode, scroll to the other option and press(OK).