2Installation GuideCeiling Flush Mount BracketPlease read this document before using the product, and save this document for future reference.Panasonic Network Camera Website: http://panasonic.co.jp/pcc/products/en/netwkcam/Please read the Operating Instructions included with the camera before proceeding.• This document (Installation Guide) explains how to install the BB-HCM527 Network Camera using theCeiling Flush Mount Bracket, and install the bracket in a ceiling.Model No. BB-HCA10CEIndoor Use OnlyPreparation1. Confirm the following items are included in the bracket’s packaging.2. You will need the following additional items to install the bracket.Ceiling Flush Mount Bracket(1 pc.)Washer (1 pc.)Order No. XWG4F16VWUsed when securing the safety wireto the ceiling.Template (1 pc.)Order No. PNPD1087ZUsed as a references whenmaking a hole in the ceiling.Ceiling Mounting Cover (1 pc.)Order No. PQKL10092Z1Used when mounting the cameraon a ceiling.Screw A (1 pc.)Order No. XTB4+20AFJUsed to secure the safety wire tothe ceiling.Screw B (4 pcs.)Order No. XYN4+F6FJUsed to secure the camera(3 pcs.) and the safety wire (1 pc.)to the bracket.Safety Wire (1 pc.)Order No. PQME10080ZUsed to secure the bracket whenmounting it.Connector Cover (1 pc.)Order No. PNHX1058ZUsed to protect the cables whenmounting the camera.Installation Guide(this document) (1 pc.)– 1 anchor bolt and 2 nuts (see step 2 and 6 on page 4)Abbreviations• The Ceiling Flush Mount Bracket is referred to as “the bracket” in this document.• The Network Camera is referred to as “the camera” in this document.