Panasonic BB-HCM403A Installation Manual

Also see for BB-HCM403A: Installation guide Operating instructions Product catalog Getting started

Contents

installation guide

Installation Guide(For Professional Installers)Network CameraModel No. BB-HCM403A (PoE Ready)•Installation ProceduresAfter preparing the Ethernet cable that has enough length, mount the camera.• The camera can be viewed in the least light requirement at 3 lx (default). Use supplemental lighting for the dimly lit places.The camera can be viewed in the least of 0.2 lx in the color night view mode (see page 70 of the Operating Instructions onthe CD-ROM), which may increase the refresh interval.• Mounting and cabling instructions described in this Installation Guide follow generally accepted guidelines suitable for residentialinstallations. In some areas, commercial and industrial installations are regulated by local or state ordinances. For such installations,contact your local building department or building inspector for more details.© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX15558ZA KK0606JT0Two ways of wiring the cables (Ethernet cable, AC adaptorcord, etc.) can be considered; wiring through a hole madein the ceiling or wiring without making a hole in the ceiling.Select either one of the two.Mounting on the CeilingWiring through a hole made in the ceilingMounting Reference Diagram (Bottom View)1 Attach the Safety Wire to the camera with Screw B andWasher (S).Adjust the position and direction of the camera while you confirm thatimages are displayed on the monitor as you imaged.Attach the camera. Attach the camera firmly when mounting on the ceiling.Indoor Ceiling Use OnlyAdjust the position anddirection of the camera.NoteScrew BSafety WireWasher (S)R 100 mm(3 15/16 inches)25 mm(1 inch)Hole for wiring cables65 mm(2 9/16 inches)• Please read the Important Information before using.• "Network Camera" is called "Camera" in this manual.• "Setup CD-ROM" is called "CD-ROM" in this manual.• Installation and wiring should be performed by a professional installer.• Install the camera after camera is connected and setup is finished following the Getting Started guide.Camera DirectionCeiling Plate BNecessary InstallationRange• Make sure to mount the camera firmly on the ceiling.• Do not mount the camera on a weak ceiling.• It is necessary to attach the Safety Wire so that the camera doesnot fall.• The Ceiling Mounting Cover should be removed when removingthe SD memory card (see page 127 of the Operating Instructionson the CD-ROM).• The camera is intended for indoor ceiling use only. Prolongedexposure to direct sunlight or halogen light may damage CCD.• The camera's MAC address and serial number are printed on thebottom of the camera. They are needed in order for cameraconfiguration and maintenance. Record both of them for beforemounting the camera.

/ 2

Related manuals for Panasonic BB-HCM403A