1Installation GuideNetwork CameraThis manual is written for both the BB-HCM580A (AC Adaptor Type) and the BB-HCM581A (PoE Ready). Available features and operations vary slightlydepending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.Please read the included Important Information before proceeding.Complete Operating Instructions and all other documentation can be found on the included CD-ROM.Model No. BB-HCM580A (AC Adaptor Type)BB-HCM581A (PoE Ready)Indoor Use OnlyInstallation Procedure OverviewThe following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.Preparation1. Confirm the following items are included in the camera’s packaging.• Additional pieces can be ordered by calling 1-800-332-5368.2. You will need the following additional items to install and configure the camera.Option for BB-HCM581AYou can also connect the camera using the optional Panasonic BB-HCA3A AC Adaptor. The BB-HCA3A includes the following items.PreparationConfirm that you have all theitems required forinstallation.Camera DiagramMake sure you know thenames of the camera’sphysical features.ConnectionsConnecting the camera toyour network and to the poweroutlet.SetupSetting up the camera (described in the includedSetup Guide). This involves configuring the cameraso that it can be accessed from a PC.MountingMounting or placing thecamera.Main Unit (1 pc.) Washer S (1 pc.)Order No. XWG26D12VWUsed when securing the safetywire to the camera.Washer L (1 pc.)Order No. XWG4F16VWUsed when securing the safetywire to the ceiling.Screw A (2 pcs.)Order No. XYN3+J6FJUsed to secure ceiling plate A toceiling plate B.Screw B (5 pcs.)Order No. XTB4+20AFJUsed to secure ceiling plate B (4pcs.) and the safety wire (1 pc.) tothe ceiling.Screw C (1 pc.)Order No. PQHV2610PJ65Used for connecting the safetywire to the camera.Ceiling Mounting Cover (1 pc.)Order No. PSKL1023Y2Used when mounting the cameraon a ceiling.Ceiling Plate A (1 pc.)Order No. PQZMHCM581AUsed to secure the camera toceiling plate B.Ceiling Plate B (1 pc.)Order No. PQMD10110ZUsed to secure the camera to theceiling.AC Adaptor (1 pc.)[BB-HCM580A Only]Order No. PQLV202UCord Length: About 3 m(9 feet 10 inches)AC Cord (1 pc.)[BB-HCM580A Only]Order No. PSJA1069ZCord Length: About 1.8 m(5 feet 11 inches)Audio/Video Cord (1 pc.)[BB-HCM581A Only]Order No. PSJA1103YSafety Wire (1 pc.)Order No. PQME10080ZUsed to secure the camera whenmounting it.Important Information (1 pc.)Installation Guide(this document) (1 pc.)Setup Guide (1 pc.)Setup CD-ROM (1 pc.)Order No. PQQX15704XCDContains the Setup Program needed toconfigure the camera, as well as thecamera’s documentation.**See the included Important Informationfor a description of each document.– a PC (see the system requirements in the Important Information document) – a LAN cable (CAT-5 straight cable)– a routerAC Adaptor (1 pc.)Cord Length: About 3 m (9 feet 10 inches)AC Cord (1 pc.)Cord Length: About 1.8 m (5 feet 11 inches)© 2007 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX15933YA KK0207CM1107Please read this document before using the product, and save this document for futurereference. Panasonic Network Camera Website: http://www.panasonic.com/netcamfor customers in the USA and Puerto Rico• This document (Installation Guide) explains how to physically connect thecamera to the power supply and network, as well how to mount or place thecamera for regular use.• The Setup Guide describes how to set up the camera so that it can beaccessed using a PC.• Refer to the Operating Instructions on the CD-ROM for details regardingthe camera’s features.• Refer to the Troubleshooting Guide on the CD-ROM if you have anyproblems configuring or using the camera.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.