Operating Instructions137Set Destination RecordingCapacity Limit in the range of 1 GBto *** GB (Drive capacity -Guaranteed Destination Hard DiskSpace).• Destination Recording Capacity Limit is largerthan (Drive capacity - Guaranteed DestinationHard Disk Space).→ Follow the instruction message.“Limit the recording capacity” is setfor each camera. Do you want todisable these settings and enablethe "Limit the destination recordingcapacity" setting?• [Limit the destination recording capacity] and[Limit the recording capacity] cannot be usedsimultaneously.→ Follow the instruction message.Enter a number in one-bytecharacter in "DestinationRecording Capacity Limit".→ Follow the instruction message.Enter "Destination RecordingCapacity Limit".• Destination Recording Capacity Limit wasblank.→ Follow the instruction message.If the connection method ischanged, all cameras will bereconnected. While reconnecting,recording will temporarily bestopped. Do you want to proceed?→ Follow the instruction message.The specified "Destination Folder"is incorrect.• The pass of the destination folder was morethan 128 characters.→ Follow the instruction message.Proxy Server SettingsEnter "Proxy Server Address". • [Use a proxy server] is checked and the ProxyServer Address space was blank.→ Follow the instruction message.Enter a number in one-bytecharacter in "Port".→ Follow the instruction message."Port" should be between 1 and65535.• A number not between 1 and 65535 wasentered in the Port blank.→ Follow the instruction message.Enter English one-byte characterin "Proxy Server Address".→ Follow the instruction message.Message Cause and Remedy