Operating Instructions150The search criteria has changed.Do you want to move the screenwithout searching?• When you changed the search criteria, butchanged screens without searching.→ Follow the instruction message.No matching images were found. • The recorded images could not be found.Conversion/Copying"Start Time" should be within therecording time.• The start time is not within the recording time.→ Follow the instruction message.Set the "Start Time" so that itcomes before the End Time.• The start time comes after the end time.→ Follow the instruction message.Set the "End Time" so that itcomes after the Start Time.• The end time comes before the end time.→ Follow the instruction message."End Time" should be within therecording time.• The end time is not within the recording time.→ Follow the instruction message.Conversion interval should bebetween 1 and (the number ofimages - 1).• The frequency is not between 1 and (thenumber of images - 1), or the space was blank.→ Follow the instruction message.Conversion interval should bebetween 1 and (end time - starttime [seconds]).• The number is larger than the time periodbetween the start time and end time, or thespace was blank.→ Follow the instruction message.Conversion interval should bebetween 1 and 3600.• The image is recorded for more than 1 hour,but the converted interval is not between 1 and3600.→ Follow the instruction message.The recorded images could not befound. Search the recordedimages and try again.• There is no recorded images.→ Search the recorded images and try again.Message Cause and Remedy