Panasonic BL-C30A Getting Started

Also see for BL-C30A - Wireless 802.11 b/g Network Camera: Operating instructions Installation/troubleshooting Installation and troubleshooting instructions

Contents

Panasonic BL-C30A Getting Started Manual pdf 1 page image

To the routerPower CordTo the DC IN jack ofthe cameraTo a LAN port of your routerTo your ModemTo your PCTo the outletEthernet cable(Straight Cat5 cable)(Customer-provided)Getting StartedNetwork CameraModel No. BL-C30A1. Check the included accessories.The following items are provided with the camera. Additional pieces can beordered by calling 1-800-332-5368.3. Connect the camera to your router.Connect the camera to your router with an Ethernet ® cable to set up the camera.2. Check the system requirement foryour PC.Your PC (Personal Computer) and network must meet the following tech-nical specifications for the camera to work properly.Main Unit . . . . . . . . . . . . . . . . . . 1 pc. AC Adaptor . . . . . . . . . . . . . 1 pc.Order No. PQLV202Y(Cord Length: About 3 m [9.8 feet])Setup CD-ROM . . . . . . . . . . 1 pc.Order No.: PSQX3229YCD(Operating Instructions, Installation/Troubleshooting, Getting Started,Setup Program)Screws . . . . . . . . . . . . . . . . . . . 2 pcs.Order No.: PQHE5004YWashers . . . . . . . . . . . . . . . . . .2 pcs.Order No.: XWG35FJPlease read the Installation/Troubleshooting manual before using.This Getting Started explains how to connect, set up and mount thecamera. See the Operating Instructions on the Setup CD-ROM fordetails about the camera features.• If you cannot complete the setup, see the Troubleshooting section ofthe Installation/Troubleshooting manual.4. Turn the camera on.Inserting the AC plug of the AC cord to the outlet powers up the camera.© 2004 Panasonic Communications Co., Ltd. All Rights Reserved.PSQX3230YB KK0904JT2115• Before you begin the installation, the UPnP feature in your router needs to be enabled. Usually, the default setting disables this feature. For more info, pleasevisit, http://panasonic.co.jp/pcc/products/en/netwkcam/ or contact your router's manufacturer.• These instructions assume your PC is already connected to the Internet and your home network includes a router that is UPnP (Universal Plug and Play) compliant.• The camera will be connected to your router using a "straight" Cat5 network cable (customer-provided).Ethernet cable(Straight Cat5 cable)(Customer-provided)To your routerTo the Ethernet (LAN)port of the camera• See Panasonic Network Camera support website athttp://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest informationabout web browser.Connect the Ethernet cable to yourrouter.Connect the Ethernet cable to the camera.Connect the power cord from the ACadaptor to the DC In jack.Connect the AC plug of the ACcord to the power outlet.After the lens moves (pan/tilt operation),confirm that the indicator lights greenafter a minute.AC AdaptorTo the power outletTo the cameraAC Cord The indicatorlights green.• If the indicator does not light green, see page 15and 16 of the Installation/ Troubleshooting.• A noise can be heard during pan/tilt operation.This is normal.OperatingSystemCPUProtocolInterfaceWeb BrowserItem DescriptionMicrosoft® Windows® XP, Microsoft® Windows® 2000,Microsoft® Windows® Me, Microsoft® Windows® 98SEPentium® III (500 MHz or greater is recommended.)TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)10/100 Mbps network card installedInternet Explorer 6.0 or later (Not included on the Setup CD-ROM)Getting Started(This manual) . . . . . . . . . . . .1 pc.Installation/Troubleshooting . . . . . . . . . 1 pc.• When you operate the camera, thepower outlet should be near the cameraand easily accessible.• Use only specified Panasonic AC adap-tor PQLV202 (Order No.PQLV202Y).Abbreviations• UPnP is the abbreviation for Universal Plug and Play.• "Network Camera" is called "Camera" in this Getting Started.Trademarks• Adobe and Acrobat are either registered trademarks or trademarks of AdobeSystems Incorporated in the United States and/or other countries.• Ethernet is either a registered trademark or a trademark of Xerox Corporationin the United States and/or other countries.• Microsoft, Windows, and ActiveX are either registered trademarks or trade-marks of Microsoft Corporation in the United States and/or other countries.• Pentium is a trademark or registered trademark of Intel Corporation or its sub-sidiaries in the United States and other countries.• Screen shots reprinted with permission from Microsoft Corporation.• All other trademarks identified herein are the property of their respective owners.AC Cord . . . . . . . . . . . . . . . . . . . 1 pc.Order No.: PSJA1069Z(Cord Length: About 1.8 m [5.9 feet])WIREDWIRELESSSwitchConfirm that the switch on the bottomof the camera is set to wired.

/ 4

Related manuals for Panasonic BL-C30A - Wireless 802.11 b/g Network Camera