Panasonic BL-C30C Operating Instructions Manual

Contents

Panasonic BL-C30C Operating Instructions Manual Manual pdf 26 page image

Operating Instructions264. Display images clicking buttons below.Notes• Date, Time and frame number are not displayed in play mode.• Maximum number of buffered images change depending on resolution, imagequality and what object the camera buffers. At the 320 x 240 pixels resolutionand the standard quality, the camera buffers about 250 frames (see page 115).(If 3 trigger settings are enabled, the internal memory capacity is divided into3 sections. In this case, each trigger can buffer about 80 frames.)1.4.1 Deleting Buffered ImagesIf you intend to delete images for each transfer condition, click [Delete BufferedImages] on the Image Buffer/Transfer page (see page 60 or page 69).Notes• When you change settings (except for Enable/Disable settings) on the ImageBuffer/Transfer page, the buffered images only for that trigger will be deleted.• The following operations also delete all buffered images.– Turning off the camera.– Saving the Date and Time page.– Restarting, updating firmware or resetting the camera to factory default.– Changing the Enable/Disable settings of Image Buffer/Transfer (see page60 or page 69).Date and time of the day when theimages were buffered are displayed.Date, time and frame number aredisplayed.[Play]:The buffered images are displayedcontinuously.[]:The previous or next image isdisplayed.[<10] or [10>]:The 10th image before or after thecurrent image is displayed.[<100] or [100>]:The 100th image before or after thecurrent image is displayed.