Panasonic BL-PA300KTA Operating Instructions Manual

Also see for BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor Twin: Getting started guide

Panasonic BL-PA300KTA Operating Instructions Manual Manual pdf 15 page image

15[For assistance, please call: 1-800-272-7033]InstallationInstallationPlacing the adaptorsRefer to the information on page 7 when selecting a location to place youradaptors.Note• If you have purchased additional adaptors, make sure you haveregistered them to the master (see page 21) before placing them whereyou plan to use them.1. Connect the adaptor to a wall outlet in the room where you plan to useit.2. Confirm that the PLC indicator of each adaptor lights in green when youplug the adaptors into the wall outlets.• If the PLC indicators do not light in green, see page 23.After you have plugged the adaptors into the wall outlets in the rooms whereyou plan to use them, test the terminal’s network speed (see page 17).Power Save ModeIf a terminal’s LAN port is inactive for more than 20 minutes (i.e., if its LANindicator is orange for more than 20 minutes), the terminal automaticallyenters Power Save mode, and its power consumption is reduced. While inPower Save mode, the adaptor’s LAN indicator is turned off.Power Save mode is only activated for terminal adaptors that are linked tothe HD-PLC network.Power Save is deactivated when:- An active network device is connected to the terminal.- A network device connected to the terminal is turned on.- The adaptor’s SETUP button is pressed.HD-PLCBL-PA300PLCSETUPLAN MASTERHD-PLCBL-PA300PLCSETUPLAN MASTERPLCTerminal Adaptor Power Save Modeabout 20 minutes laterLAN MASTER PLC(green)(green)(orange)LAN MASTER