Note• When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/mobile”*1 in the address box of the browser. When using the DDNS function, access to “http://Hostname registered in the DDNS server: (colon) + port number/mobile”.• When “HTTPS” is selected for “HTTPS” - “Connection” on the [Network] tab of the “Network” page,enter as follows.“https://IP address: (colon) + port number/mobile” or “https://Host name registered in the DDNS server:(colon) + port number/mobile”• When the authentication window is displayed, enter the user name of an administrator or user andpassword. Depending on the cellular phone in use, password entry may be required each time thescreen is switched.• It is impossible to transmit/receive audio using a cellular phone.• Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting“9 Low” for “Image quality setting” of “JPEG” (®page 47) may sometimes solve this problem.• Depending on the cellular phone in use or its contract plan, it may be impossible to access.*1 IP address is the global WAN IP address of the router that can be accessed via the Internet.*2 Only displayed for users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User auth.”.(®page 94)2.2 Monitor images on a mobile terminalIt is possible to connect to the camera using a mobile terminal and monitor images (MJPEG only) from thecamera on the screen of the mobile terminal. Images are automatically refreshed to display the latest image.Operations such as pan/tilt/zoom can also be performed.The compatible mobile terminals are shown as follows. (As of January, 2012)– iPad, iPhone, iPod touch (iOS 4.2.1 or later)– Android™ mobile terminalsOnly JPEG images can be viewed from standard Android mobile terminal browsers.For further information about compatible devices, refer to our website(http://panasonic.net/pss/security/support/info.html).IMPORTANT• When the authentication window is displayed, enter the user name and password. The default username and password are as follows.User name: adminPassword: 12345To enhance the security, change the password for the user “admin”. (®page 94)Note• To view the camera images from a mobile terminal, network settings needed in order to connect to theInternet must be set in advance. (®page 104)22 Operating Instructions2 Monitor images on a cellular phone/mobile terminal
