Panasonic BL-WV10A Setup Manual

Also see for BL-WV10A: Operating instructions Setup guide Service manual

Contents

Panasonic BL-WV10A Setup Manual Manual pdf 17 page image

17Adding More Cameras to the SystemUp to 8 cameras can be registered to the BL-WV10A. If you purchase additionalcameras later, you can register them by setting the mode switch of the BL-WV10Ato [SETUP], then turning the unit off and on again. The Quick Setup utility willbegin, and you can then follow the same procedure used to register your existingcameras.Viewing Camera ImagesTo start up the BL-WV10A to view camera images, make sure the mode switch onthe rear of the unit is set to [NORMAL] and turn on the BL-WV10A. The startupscreen will appear. If the [Date and Time] screen appears, set the date and time,then press [ENTER]. The camera image should then appear.While camera images, you can aimthe camera by panning and tilting thelens using the navigator keys.Pressing [DISPLAY] repeatedlydisplays different camera and imageinformation.Pressing [ENTER] aims the camera atthe camera's Home Position.Pressing buttons [1]-[4] aims thecamera at one of the Preset Positions.You can change the 4 preset positionsand register 4 additional PresetPositions (5-8) as well.For more information, see “ViewingCamera Images” on page 54 of theOperating Instructions.[DISPLAY][ENTER]Navigator keys

/ 20

Related manuals for Panasonic BL-WV10A