Panasonic BT-3DL2550E Operating Instructions Manual

Also see for BT-3DL2550: Brochure Brochure Brochure

Panasonic BT-3DL2550E Operating Instructions Manual Manual pdf 40 page image

40Main Menu (continued)Underlined values indicate factory defaults.*1 All five input lines (VIDEO, SDI1, SDI2, YPBPR /RGB, DVI-D) cannot be turned off. An attempt to turn off allinputs ends when the fourth input line is turned off since it will not be possible to turn off the 5th input line also.*2 “AUTO” is the factory default, but select a specific format when there is risk that the input signal may becontaminated by outside noise.*3 When 3D mode is set to SIMUL, the SDI1 and SDI2 lines are selected regardless of the OFF/ON setting.INPUT SELECTSub menu Settings DescriptionVIDEO OFFONTurns VIDEO line to the INPUT button on/off. *1FORMAT AUTONTSCPALSelects the video input format. *2 Automatically selects NTSC or PAL. NTSC PALNTSC SETUP 7500Selects NTSC setup level.<75> Select this function when using 7.5% setup signals.(Adjusts the interior of the monitor to the 7.5% setuplevel to suit the black level)<00> Select this when there is no setup signal.SDI1 *3 OFFONTurns SDI1 line to the INPUT button on/off. *1SDI2 *3 OFFONTurns SDI2 line to the INPUT button on/off. *1YP BP R/RGB OFFONTurns YPBPR/RGB line to the INPUT button on/off. *1MODE YP B PRRGB-VIDEORGB-COMP.Selects YPBP R (component) or RGB input mode.BPR > Selects the YP BP R signal.

Selects the video RGB signal.

Selects the PC RGB signal.COMPONENTLEVELSMPTEB75B00Selects YP BP R (component) signal input level. Signal level complies with SMPTE and P B and PR are0.7 V [p-p] at 100% chroma. Select this when connecting a Betacam or similardevice with a setup function. (Adjusts the interior of themonitor to the 7.5% setup level to suit the black level) Select this when connecting a Betacam or similardevice without a setup function.SELECT SYNC INTEXTSelects the sync signal when using YPB PR and RGB-VIDEO input. Select when the synchronizing signal is superimposedon the G or Y signal. Select to synchronize with an external synchronizingsignal.COMP. Performs analog PC settings. (“COMP.” J page 41)DVI-D *3 OFFONTurns DVI-D line to the INPUT button on/off. *1MODE DVI-VIDEODVI-COMP.Selects DVI-D input mode.

Selects the RGB signal input of RGB video.

Selects PC input.

2D ONLY2D ONLY2D ONLY2D ONLY2D ONLY2D ONLY2D ONLY2D ONLY