Panasonic BT-LH1500 Operating Instructions Manual

Also see for BT-LH1500p: Operating instructions Operating instructions

5Front View! @ # $ %POWER A BINPUT SELECTS OPTION MENU/EXITBLUEONLYPHASE CHROMA BRIGHT CONTRASTMHVDELAYENTERMENUqS1234567 89qRqS7, 8, 9 to qR are options.Rear ViewControl and Their Functions! Power switchThis is the main power switch.With power ON, the upper LED (green) of the switch islighted.@ Input select buttonThis is the signal input select button.The input line of the button pressed is selected, then theupper LED (green) is lighted.A: Line-A (composite input)B: Line-B (composite input)S: S-Video (S-video input)OPTION: Option unit# Menu select buttonUsed for menu display, adjustment and setting.MENU/EXIT: Push when displaying a menu and getting outof the menu.: Push when moving the cursor up/down or se-lecting an item.ENTER: Push when getting into a downward menu.$ BLUE ONLY/HV DELAY buttonBLUE ONLY: With the button pushed, picture quality canbe adjusted by color lever.When it is pushed again, the mode returnsto normal display.HV DELAY: SYNC, blanking, and burst flag can be ob-served.Normal, H-Delay, V-delay and HV-Delay arerepeatedly displayed each time whenpushed. It doesn’t work when HD ZOOM isused.% Picture adjusting knob(Hue/chroma/brightness/contrast)Adjustable with the knob pushed and popped out, and re-turned to preset value with it pushed in.When set to a value other than the standard preset value,the upper LED (amber) of adjusting knob is lighted.1 LINE-A connectorThis is the composite input connector A (BNC). (Withthrough-out type)2 LINE-B connectorThis is the composite input connector B (BNC). (Withthough-out type)3 S-video input connectorThis is the S-video signal input connector. (With though-out type)4 REMOTE terminalThis is the REMOTE terminal (9-pin D-Sub).5 SIGNAL GND terminalThis is the signal GND terminal.6 AC power input socketThis is the AC power socket. Connect the attached powercord. (Slip-off preventive fittings attached)7 HD-SDI connectorThis is the HD-SDI input connector (BNC). (With activethrough-out type) [In use of optional HD SDI INPUT UNIT(BT-YA300P)]8 SDI connectorThis is the SDI input connector (BNC). (With active through-out type) [In use of optional SDI INPUT UNIT (BT-YA200P)]9 – qR COMPONENT/RGB connectorThis is the analog component/RGB input connector (BNC).(With through-out type)Also provided with external sync connector. [In use of op-tional COMPONENT/RGB INPUT UNIT (BT-YA100P)]qS VESA mount!!