Panasonic BT-LH1710 - Professional - LCD Production Monitor Operating Instructions Manual

Also see for BT-LH1710 - Professional - LCD Production Monitor: Brochure Specifications Brochure & specs

6• The LCD screen is manufactured to precise specifications. Although over 99.99% of the pixels function normally,0.01% of the pixels are either missing or constantly lit (red, blue or green). This is normal and not a cause forconcern.• The liquid crystal protection panel is a specially manufactured component. Wiping it with a hard cloth, or rubbingit vigorously will scratch the surface.• If a still image is displayed for an extended period of time, it may generate a temporary afterimage (phosphorburn-in). (However, such images can be removed by displaying normal video for a while.)• The response speed and brightness of liquid crystal vary with ambient temperatures.• Let authorized service person handle installation.Be sure to consult with the service person about the installation. Make sure that the wall is strong enough toendure the weight of this unit including the mount fittings. If not strong enough, it may fall off resulting in injury.• Do not install the unit in a place exposed to direct sunlight, as it may damage the cabinet and the LCD screen.• Be sure to attach a protection panel (optional accessory) when the unit is used outdoors.• Do not install the unit in locations where enough space cannot be provided around it as heat may build up insidepreventing normal operation. Be sure to provide enough space around the unit.• Exposing the LCD screen to intense light sources will impair its characteristics and lower image quality.• In an environment exposed to drastic temperature fluctuations, condensation may build up on and inside theLCD screen. This may lower the quality of the screen and may damage it.• Some video images may appear blurred on the screen.• Leaving the unit in a location exposed to high temperature and humidity for an extended period of time maydamage the LCD screen and cause blurring.• Streaks of light may be seen in the area between the edge of the screen and the frame; this is normal and not amalfunction.ContentsRead this first ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Transportation precautions . . . . . . . . . . . . . . . . . . . 5Precautions for Use . . . . . . . . . . . . . . . . . . . . . . . . 6Standard accessories . . . . . . . . . . . . . . . . . . . . . . . 6Optional units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Controls and Their Functions . . . . . . . . . . . . . . . . . 8Video monitor unit ................................................... 8Front panel ............................................................. 9Rear panel............................................................ 10Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11How to Use the On Screen Menu . . . . . . . . . . . . . . 12User Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Menu configuration............................................... 17MARKER.............................................................. 18Marker types......................................................... 19VIDEO CONFIG ................................................... 20SYSTEM CONFIG................................................ 22FUNCTION........................................................... 23GPI ....................................................................... 29INPUT SELECT.................................................... 30AUDIO ................................................................... 32DISPLAY SETUP .................................................. 33CONTROL............................................................ 34HOURMETER ...................................................... 34REMOTE Specifications . . . . . . . . . . . . . . . . . . . . 36How to Attach the Rack Mount. . . . . . . . . . . . . . . . 40Maintenance Inspections . . . . . . . . . . . . . . . . . . . . 40Error and Warning Displays . . . . . . . . . . . . . . . . . . 41Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Standard accessoriesPower cord × 1Power cord hook × 1Screw × 1AC mains lead × 2AC mains lead hook × 1Screw × 1Optional unitsRack Mount Adaptor BT-MA1710G (Installation instructions J page 40)Wall Mount Adaptor BT-WMA17G (Leave installation of the wall mount adaptor to authorized personnel.)Protection Panel BT-PRP17G (Refer to the installation instructions in the operating instructions supplied with theprotection panel.)Precautions for Use