Panasonic BT-LH2550 Menu Information

Also see for BT-LH2550: Brochure Specifications Brochure & specs Operating instructions

Contents

main menu

15How to Use the On Screen MenuThe screen displays eight types of information: input signal status, picture/volume adjusting menu status,sharpness display, FUNCTION display, audio level meter display, menu display, TIME CODE display and CLOSEDCAPTION display.1. Main window , sub-window indication• Indicates whether the main window or sub-windowis displayed.• In split screen display, the screen synchronized tothe reference sync changes with the input signalformat and “TWO WINDOW SIZE” settings (J page44).The screen synchronized to the reference sync isdisplayed in white and the screen that is notsynchronized is displayed in yellow.2. The selected input line (J page 11, )• VIDEO, SDI1, SDI2,YPB PR/RGB-VIDEO/RGB-COMP.DVI-VIDEO/DVI-COMP.• Use “STATUS DISPLAY” in the “SYSTEM CONFIG”menu to set the display status (J page 29 ) .3. Various indications (FILM mode)• This indicates that “GAMMA SELECT” is set to“FILM” in the “VIDEO CONFIG” menu.4. Signal format• Use “STATUS DISPLAY” in the “SYSTEM CONFIG”menu to set the display status (J page 29).• “UNSUPPORT SIGNAL” appears if an unsupportedsignal is input. It may also indicate that the formatselected in the “INPUT SELECT ” menu does notmatch the input signal.• “NO SIGNAL” appears if no signal is input.Note:“UNSUPPORT SIGNAL” and “NO SIGNAL” may notbe properly displayed.5. Various indications (Lock status)• This indicates that “CONTROL” is set to “REMOTE”in the “CONTROL” menu.• Press the ADJUST button (J page 11, ) to openthe picture/volume adjusting menu.• To clear the display, press the ADJUST button again,press the MENU button or leave it idle for 10seconds.• Only adjustments that appear on the screen can beadjusted.• The display always appears in the same screenlocation.• This is the SHARPNESS H/V mode display.• It disappears after 2 minutes of inaction.Input signal status7Picture/volume adjusting menu9Sharpness display