Panasonic BY-HPE11KTA Operating Instructions Manual

Also see for BY-HPE11KTA: Installation guide

Problem Cause and RemedyThe center adaptor’sCOAXIAL indicator isnot lit.• The center adaptor is not receiving power.→ Confirm that the AC cord is connected to the power outletand AC IN of the center adaptor (see 3.2 Connectionsin the Installation Guide).• The coaxial cable is not connected.→ Confirm that the coaxial is not over 2 km (6,561 feet 8inches) in length and is connected properly (see3.2 Connections in the Installation Guide).→ Confirm that there are no connection problems such asdamage or breaks in the cable.• The camera adaptor is not connected.→ Connect the center and camera adaptors with a coaxialcable (see 3.2 Connections in the Installation Guide).The center adaptor’sCOAXIAL indicator is litred.• Data cannot be sent because the center adaptor may bemalfunctioning.→ Contact an authorized service center.4.2 Communication Speed IssuesProblem Cause and RemedyWhen testing thecommunication speed,all the indicators are off,or only 1 or 2 of theindicators are lit.• The communications speed may be affected due to issueswith the installation environment.→ This is not a malfunction. Confirm that there are noproblems with using the camera or displaying images.→ Confirm that the coaxial cable is of a suitable type andlength, and that there are no devices near the unit thatmay cause strong interference.24 Operating Instructions4 Troubleshooting