Panasonic CCQ-C5401W Operating Instructions Manual

Contents

Panasonic CCQ-C5401W Operating Instructions Manual Manual pdf 12 page image

231ENGLISHCQ-C5401W/C5301W22Turn [VOLUME].q : Upw : DownTurn [VOLUME].q : Upw : DownNote:¡ You cannot saveany SQ presettingvalue in [1] button.¡ Any SQ adjust-ments will notchange the call upscreen names suchas ROCK and JAZZ.Turn [VOLUME].q : Upw : Down2221ENGLISHCQ-C5401W/C5301WAudio SettingsSQ AdjustmentYou can adjust the characteristics of the currently selectedsound type (SQ).It is also possible to preset up to 5 different adjusted SQs.Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)SQ Mid : ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)¡ The bass/treble control frequency is fixed to the frequencythat has been selected for SQ.FTo return an adjusted SQ to the default settingq Press [SQ], and select the SQ which is to be returned tothe default setting. (Only for main unit)w Press and hold [BAND] for more than 2 seconds.Bass/TrebleYou can adjust the bass and treble sounds.Default: BAS (bass) 0 dBTRE (treble) 0 dBSetting range: –12 dB to +12 dB (by 2 dB)Press [VOLUME] (PUSH SEL).Press [VOLUME] (PUSH SEL).Press [VOLUME] (PUSH SEL).The SQ adjustment mode can beestablished also by pressing [SQ]for more than 2 seconds.TILT/OPENDISCSCROLLPWRMUTERANDOM SCAN REPEAT CLOCKFOLDERVOLUMEPUSHSELTUNE/TRACKCQ-C5401W21 3SRCSQ 4 5 6 DISPBANDAPMVolumeDefault: 13Setting range: 0 to 40Press [VOLUME] (PUSH SEL)to open the menu.[DISP] (Return to the regular mode)Press [VOLUME](PUSH SEL: select).(Press [SEL] on theremote control unit.)Turn [VOLUME]. (Press [VOL }] or[VOL {] on the remote control unit.)Note:¡ To return to the regular mode, press [DISP].¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 sec-onds in the SQ adjustment), the display returns to the regular mode.¡ The volume can also be adjusted directly using [VOLUME] on the main unit. (a Page 9)¡ Please refer to page 9 for calling up a preset SQ.VOLUME BASSSUBW LPF SUBW LEV FADERSQ SETRegular mode TREBLEBALANCE[SQ] (Sound Quality)q Press [[] or []] to select a frequencyband (Low, Mid, High).[[]: Higher frequency band[]]: Lower frequency bandTurn [VOLUME] to select a frequency.q: Higher frequencyw: Lower frequencyw Press [}] or [{] to adjust the level.[}]: Up[{]: Downe Press and hold one of the preset buttonsfrom [2] to [6] for more than 2 seconds.¡The adjusted SQ is preset in the num-ber of the selected button, and returnto the regular mode resumes.¡When you suspend the SQ preset adjustment, each level remains your recentadjustment until a new SQ presetting operation is performed or you call upthe SQ preset.[[] []][{] [}][BAND]Preset Buttons [2] to [6](Page 24)LevelThe selected frequency bandblinks.Frequency