ComponentSource ofproblemNo. Symptom TroubleshootingproceduresNo. Result5 YES Settings5-1Cannot connect WirelessLANSettings5.11-1No display after poweringonAn afterimage appearsSettingsGo to No. 1-1~7-15.22-1Confirm the IP address,subnet mask, network type,and SSID settings on both thecomputer and the wirelessdisplay.Connection timeout isdisplayedNOYESNOGo to No. 5.1~5.6Go to No. 1-1~7-1Settings1-2If an image is displayed for aprolonged period of time, anafterimage may appear.Set the screensaver.Has the computer or wirelessdisplay been set to thepower-saving mode?To resume operation of yourcomputer from the conditionthe power of the display is off(for energy conservationpurposes), touch the screen.YESNOYESNOSettingsGo to No. 1-1~7-15.33-14-1Put the wireless display closeto the computer.No server found isdisplayed YESNOSettingsGo to No. 1-1~7-15.4 Confirm the password for boththe computer and the wirelessdisplay.Authentication failed isdisplayed YESNO5-1 SettingsGo to No. 1-1~7-15.5 Disconnect the wirelessdisplay during operation andreestablish the connection.Too many clients isdisplayed YESNO6-1 SettingsGo to No. 1-1~7-15.6 Confirm whether the networkis working properly or not.Illegal data received orInitial image receivingtimeout is displayedYESNO7-1 SettingsGo to No. 1-1~7-15.7 Select wireless icon on thetaskbar of the externaldisplay, then selectContiguration, and then setTx Rate to Auto 1 or 2 Mb.(CF-07)Wireless connection isinterrupted YESNO6-2 SettingsGo to No. 1-1~7-1Restart the computer. YESNOSettingsGo to No. 1-1~7-12-2Confirm the operation of thewireless LAN on thecomputer.YESNOGo to No. 1-1~7-1YES Wireless LAN PCB(CF-07/ CF-VDW07)IC509IC5145-2Replace the Wireless LANPCBRe-setting for Wireless LANand DisplayNO Go to No. 5.1~5.6SettingsGo to No. 1-1~7-13-2Confirm that wireless icon ison the taskbar. YESNOSettingsGo to No. 1-1~7-13-3Confirm the IP address of thecomputer that has been seton the wireless display.YESNO14-4