Panasonic CF-19 Operating Instructions Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Supplementary guide Operating instructions Operating instructions

Contents

Hard Disk Data Erase UtilityWhen disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage.Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read withsome special software. Use the hard disk data erase utility to erase the data completely.Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software’slicense agreement.The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to mal-functions or other operational errors, data may not be completely erased. There are also specialized devices thatmay be able to read data that has been erased using this method. If you need to erase highly confidential data, werecommend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. willbear no responsibility for losses or damages suffered as a result of the use of this utility.CAUTIONz When the hard disk contains the Recover Pro backup data, the Recover Pro backup area is lost as well.NOTEz This utility cannot erase data for specific partitions.Preparationz Prepare the following items:y The Product Recovery DVD-ROM (included)y Panasonic USB CD/DVD drive (optional) (refer to recent catalogs and other sources for information aboutthe products available)z Remove all peripherals (except for the CD/DVD drive).z Connect the AC adaptor and do not remove it until hard disk data erase is complete.1 Turn off the computer and connect the CD/DVD drive to the USB port (Î page 11).2 Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-played.The Setup Utility starts up.z If the password is requested, enter the Supervisor Password.3 Select the [Boot] menu, then select [USB CDD] and press F6 until [USB CDD] is at thetop of the boot priority order.4 Set the Product Recovery DVD-ROM into the CD/DVD drive.5 Press F10.At the confirmation message, select [Yes] and press Enter.The computer restarts.6 Press 2 to execute [2. [Erase HDD]].z To cancel this operation, press 0.7 At the confirmation message, press Y.8 When [<<< Start Menu >>>] is displayed, press Enter.The approximate time required for erasing data will be displayed.9 Press Space.At the confirmation message, press Enter.The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted.]message will appear. If a problem has occurred during the operation, an error message will appear.z To cancel partway, press Ctrl + C. The data erasure will be up to that point.10 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-puter.11 Remove the CD/DVD drive.Useful Information21