Panasonic CF-19 Operating Instructions Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Supplementary guide Operating instructions Operating instructions

Contents

15 Getting Startedz Remember your password. If you forget the password, you cannot use the Win-dows. Creating a password reset disk beforehand is recommended.z The wallpaper for the first logon user has already been set on “4 Setup Windows.” .When using this computer under the Sun, the screen becomes easily viewableby changing the wallpaper to the white wallpaper.A Right-click on the desktop, and click [Personalize] - [Desktop Background].B Select [Solid Colors] at [Picture Location].C Select the white wallpaper and click [Save changes].z When you set date/time/time zone and click [Next], the screen may not go to thenext step for a few minutes. Do not touch the keyboard or touch pad, and waituntil the screen changes.z If “An unexpected error has occurred ...” (or a similar message) is displayed,click [OK]. This is not a malfunction.z Wait until the hard disk drive indicator has turned off.6 Perform the touchscreen calibration.NOTEz At first, log on to Windows as an administrator, and perform this calibration.z Return the rotated display to [Primary Landscape] before the touchscreen calibration.A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].B Using the stylus, touch each of the “+” target marks one by one.NOTEz Perform the following calibration for each user.A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].B Click [Calibrate].C Using the stylus, touch each of the “+” target marks one by one, and then click [Yes].z Perform the calibration for the orientation to be used.A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch ScreenCalibration Utility].B Using the stylus, touch each of the 12 “+” target marks one by one until itblinks, and then press Enter.C Press Enter.NOTEz Perform these calibration for each user.z If you cannot touch the desired position, perform Digitizer Calibration again andrestart the computer.A Run [Tablet PC Settings].Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].B Click [Calibrate].C Select [Pen input].D Using the digitizer pen, touch each of the “+” target marks one by one, andthen click [Yes].z Perform the calibration for the orientation to be used.A Run [Tablet and Pen Settings].Double-click or click [start] - [Control Panel] - [Printers and Other Hard-ware] - [Tablet and Pen Settings].B Click [Settings] - [Calibrate].C Using the digitizer pen, touch each of the 4 “+” target marks one by one, andthen click [OK].z Perform the calibration for both [Landscape] and [Portrait].