Panasonic CF-19CHGACJM - Toughbook 19 Touchscreen PC Version Reference Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Operating instructions Supplementary guide Operating instructions

137Troubleshooting (Advanced)Cannot input using the touch pad. z Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility (Î page107).z The touch pad may be disabled by some mouse drivers. Check your mouse’soperating instructions.Cannot point the correct position usingthe included stylus/digitizer pen.z Perform the touchscreen calibration (Î page 12).z Perform the dual touch calibration (Î page 16).Cannot input using the touchscreenz Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the SetupUtility (Î page 107). If you still cannot use the touchscreen, perform the follow-ing procedures to install the touchscreen driver.Click (start), input “c:\util\drivers\tscreen\TPSetUp.exe” in [Search programsand files], and press Enter.Click [start] - [Run], input “c:\util\drivers\tscreen\ftsetup.exe” and click [OK].Cannot use scroll function of touchpad on Internet Explorer.z Use Touchscreen.z Move the mouse cursor to outside of Internet Explorer, and return to InternetExplorer. PC Card / ExpressCard (only for model with ExpressCard slot)A card does not work. z Insert the card correctly.z The card does not conform to the card standard.z Restart the computer after installing a driver (of card or other device).z Set [PC Card Slot] and [ExpressCard Slot] to [Enabled] in the [Advanced] menuof the Setup Utility (Î page 111).z The port settings are not correct.z Read the instruction manual of the card or contact the manufacturer of the card.z Remove the card and insert it again (Î page 43).z The driver is not compatible with the operating system. SD Memory CardCannot use an SD Memory Card. z Set [SD Slot] to [Enabled] in the [Advanced] menu of the Setup Utility (Î page111). Touch Pad / Touchscreen (only for model with touchscreen) / Dual Touch (onlyfor model with dual touch)