Panasonic CF-29 Series Reference Manual

Also see for CF-29 Series: Operating instructions User guide Operating instructions Reference manual Service manual

81Wireless LAN5 Make necessary changes and select [OK].z For security, we recommend that you enable encryption (WEP). If you enableWEP, enable encryption on the access point side as well.(The setting described below is only an example. For the other settings, askyour system administrator or the person in charge of the network.)A Select [WEP] on [Data Encryption].B Select [64-bit] or [128-bit] from [Encryption Level].C Input the Encryption key in [Wireless Security Password (Encryption key)].In the case of pass phrase: [64-bit (5 characters)] [128-bit (13 characters)]. Inthe case of hexadecimal: [64-bit (10 digits)] [128-bit (26 digits)].• Set the same values for the computer side and the access point side.• When using an access point for which "128-bit" can be set (some accesspoints display "104-bit"), we recommend setting data encryption to "128-bit" to prevent unauthorized decryption.6 Select the profile you have set and select [Connect].z If the setting of the profile that is currently connected is changed, the new settingwill not be enabled until you select the profile and then select [Connect].NOTEz If is displayed, the computer is connecting to an access point. Wait for amoment.If is displayed for a longer time, perform the following procedure.A Display [Intel PROSet/Wireless] screen.(Î page 80)B Select again a profile name you want to connect, and select [Connect].If is not displayed, perform the following procedure.A Select [start] - [Control Panel] - [Network and Internet Connections] - [NetworkConnections].B Right-click [Wireless Network Connection], and select [Properties].C Add a checkmark for [Show icon in notification area when connected], and thenselect [OK].7 Select [Close].