Panasonic CF-31 Series Operating Instructions Manual

Also see for CF-31 Series: Supplementary instructions Operating instructions Operating instructions Operating instructions Reference manual

Contents

16Getting Started Touching the keyboard, touch pad or touchscreen (only for model with touchscreen) Closing the display Turn on/off the wireless switchl When the CPU temperature is high, the computer may not start up to preventoverheating of the CPU. Wait until the computer cools down, and then turn thepower on again. If the computer does not power on even after cooling down,contact Panasonic Technical Support (è pages 33 - 37).l Any changes from the default setting of the Setup Utility must not be made untilthe First-time Operation is completed.6 Setup Windows.Follow the on-screen instructions.l The computer restarts several times. Do not touch the keyboard or touchpad, and wait until the hard disk drive indicator has turned off.l After the computer is turned on, the screen remains black or unchanged fora while. This is not a malfunction. Wait for a moment until the Windows setupscreen appears.l During setup of Windows, use the touch pad and clicking to move the cursorand to click an item.l Setup of Windows will take approximately 20 minutes.Go to the next step, confirming each message on the display.l “Join a wireless network” screen may not appear.You can set the Wireless Network after the setup of Windows is complete.CAUTIONl You can change the user name, password, image and security setting aftersetup of Windows.l Remember your password. If you forget the password, you cannot use Win-dows. Creating a password reset disk beforehand is recommended.l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-count name) that includes the “@” mark, a password will be requested at thelog-on screen, even if no password has been set. If you try to log on without en-tering a password, “The user name or password is incorrect.” may be displayedand you will not be able to log on to Windows (è page 24).7 Perform the touchscreen calibration.Before performing the calibration, close Tablet PC Input Panel.n Calibration by an administratorNOTEl At first, log on to Windows as an administrator and perform this calibration.A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-ting].B Click [Calibrate].C Using the stylus, touch each of the “+” target marks one by one, and thenclick [Yes].D Click [OK].n Calibration by a standard userNOTEl Perform the following calibration for each user.A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-ting].B Click [Calibrate].C Using the stylus, touch each of the “+” target marks one by one, and thenclick [Yes].First-time Operation