Panasonic CF-52 Series Reference Manual

Also see for CF-52 Series: Supplementary guide Supplementary guide Supplementary instructions Getting started guide Supplementary instructions

35SD Memory CardCAUTIONz Do not remove or insert the SD Memory Card until Windows has completed loading.z Do not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.• While the computer is in standby or hibernation.• While the SD Memory Card indicator is on.• While data is being read from or written to the card.• Immediately after the writing operation. The computer may still continue the access to the card just after writingoperation. If you remove the card before the operation is completed, the data may be damaged or the card accessmay no longer be performed normally.z Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages,direct or indirect.z Do not forcibly draw out the card or the dummy card, otherwise the slot may be damaged.z Insert the card in the correct direction, otherwise the card and the slot may be damaged.z After resuming from standby or hibernation, do not access the SD Memory Card for approximately 30 seconds. To insert the card1 Insert the SD Memory Card with the label side facing up and withthe cut corner in front. To remove the cardPreparationz Save the data and close all applications.z Confirm the SD Memory Card indicator (B) is off.1 Disable the card function.A Double-click on the notification area and click [Secure Digital Storage Device],then click [Stop].B Follow the on-screen instructions.z This step is not necessary when removing the card after turning off the computer.Inserting/Removing the SD Memory Card