If a new plug is to be fitted please observe the wiring code asshown below.If in any doubt please consult a qualified electrician.Warning: THIS APPLIANCE MUST BE EARTHED.ImportantThe wires in this mains lead are coloured in accordance withthe following code:Green-and-yellow: EarthBlue: NeutralBrown: LiveAs the colours of the wires in the mains lead of this apparatusmay not correspond with the coloured markings identifyingthe terminals in your plug, proceed as follows:The wire which is coloured GREEN-and-YELLOW must beconnected to the terminal in the plug which is marked by theletter E or by the safety earth symbol coloured GREEN orGREEN-and-YELLOW.The wire which is coloured Blue must be connected to the ter-minal which is marked with the letter N or coloured BLACK.The wire which is coloured Brown must be connected to theterminal which is marked with the letter L or coloured RED.The mains plug on this equipment must be used to disconnectthe mains power.Please ensure that a socket outlet is available near the equip-ment and shall be easily accessible.How to replace the fuseOpen the fuse compartment witha screwdriver and replace thefuse.WarningsThis equipment is not designed for connection to an ITpower system.(An IT system is a system having no direct connections be-tween live parts and Earth; the exposed-conductive-parts ofthe electrical installation are earthed.An IT system is not permitted where the computer is di-rectly connected to public supply systems in the U.K.)Disconnect the mains plug from the supply socket whenthe computer is not in use.This equipment is produced to BS800/1983.8-E-1For U.K.WarningThis apparatus must be earthed for your safety.To ensure safe operation the three-pin plug must be insertedonly into a standard three-pin power point which is effectivelyearthed through the normal household wiring.Extension cords used with the equipment must be three-coreand be correctly wired to provide connection to earth. Wrong-ly wired extension cords are a major cause of fatalities.The fact that the equipment operates satisfactorily does notimply that the power point is earthed and that the installationis completely safe.For your safety, if you have any doubt about the effectiveearthing of the power point, consult a qualified electrician.FOR YOUR SAFETY PLEASE READ THE FOLLOW-ING TEXT CAREFULLYThis appliance is supplied with a moulded three pin mainsplug for your safety and convenience.A 3 amp fuse is fitted in this plug.Should the fuse need to be replaced please ensure that the re-placement fuse has a rating of 3 amps and that it is approvedby ASTA or BSI to BS 1362.Check for the ASTA mark A S A or the BSI mark on thebody of the fuse.If the plug contains a removable fuse cover you must ensurethat it is refi tted when the fuse is replaced.If you lose the fuse cover the plug must not be used until areplacement cover is obtained.A replacement fuse cover can be purchased from your localPanasonic Dealer.IF THE FITTED MOULDED PLUG IS UNSUITABLE FORTHE SOCKET OUTLET IN YOUR HOME THEN THEFUSE SHOULD BE REMOVED AND THE PLUG CUTOFF AND DISPOSED OF SAFELY.THERE IS A DANGER OF SEVERE ELECTRICALSHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY13 AMP SOCKET.OPERATING INSTRUCTIONSBEDIENUNGSANLEITUNGINSTRUCTIONS D’UTILISATIONAC AdaptorNetzkabelAdaptateur secteurModel No./Modell-Nr.Numéro de modèle CF-AA5713A© Panasonic Corporation 2010-2011DFQW5384YA HS0310-1121Printed in Japan