Panasonic CF-F9 Series Operating Instructions Manual

Also see for CF-F9 Series: Supplementary instructions Reference manual Reference manual Reference manual Operating instructions

Contents

24Reinstalling SoftwareGetting StartedUseful InformationTroubleshootingAppendix13 At the confirmation message, click [YES].Reinstallation starts automatically. (It will take approximately 30 - 80 minutes.)z Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may becomeunavailable as Windows may not start up or the data may be corrupted.z According to the instruction on the screen, switch Product Recovery DVD-ROM.14 Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.15 Turn on the computer.z If the password is requested, enter the Supervisor Password.16 Perform the “First-time Operation” (Î page 13).17 Start the Setup Utility and change the settings as necessary.18 Perform Windows Update.10 Press 1 to execute [1. [Recovery]].The License Agreement screen appears.z To cancel partway, press 0.11 Press 1 to select [1. Yes, I agree to the provisions above and wish to continue!].12 Select the settings.When installing Windows XP into hard disk installed from Windows 7, select 1 or 2.Do not select [3]: This option is only available when using Windows XP.If you select [3]: an error may occur during the installation.13 At the confirmation message, press Y.Reinstallation starts automatically. (It will take approximately 30 - 60 minutes.)z Do not interrupt reinstallation, for example by turning off the computer or pressing Ctrl + Alt + Del. Other-wise reinstallation may become unavailable as Windows may not start up or the data may be corrupted.14 Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.z If additional instructions are included with the computer, be sure to read them. It may be necessary to performadditional operations during the following procedure.15 Turn on the computer.z If the password is requested, enter the Supervisor Password.16 Perform the “First-time Operation” (Î page 13).17 Start the Setup Utility and change the settings as necessary.