19Security MeasuresUse these features to protect your data.Set the Supervisor Password before setting the User Password.Preparationz Set the computer to the Cradle and connect an external keyboard to the Cradle.1 Start up the Setup Utility (Î page 53).2 Select [Security].3 Select [Set Supervisor Password] or [Set User Password], and press (Enter).4 Enter your password in [Enter New Password] and press (Enter).z When the password has been set, you need to enter your password in [Enter Current Password] and press(Enter).z To disable the password, leave the input field empty and press (Enter).5 Enter your password again in [Confirm New Password] and press (Enter).6 In [Setup Notice], press (Enter).7 Press F10, and then select [Yes] and press (Enter).CAUTIONz Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Con-tact Panasonic Technical Support.z When running the Setup Utility, do not leave and go away from your computer even for a short time, since other peoplemay set or change the password.NOTEz The password will not be displayed on the screen.z You can use up to 32 alphanumeric characters (including spaces).• The case (upper/lower) is ignored.• Use only the upper horizontal row of numeric keys to input your password.• You cannot use Shift and Ctrl to input a password.z Disabling the Supervisor Password also disables the User Password.Setting the Supervisor Password/User Password