Panasonic CF-H1BDBBZCM Operating Instructions Manual

Also see for CF-H1 Series: Supplementary instructions Operating instructions Reference manual Operating instructions Operating instructions

Contents

14Getting Startedz You can change the user name, password, image, Wireless Networks ( ) andsecurity setting ( ) after setup of Windows.z Remember your password. If you forget the password, you cannot use the Windows.Creating a password reset disk beforehand is recommended.z When you set date/time/time zone and click [Next], the screen may not go to the nextstep for a few minutes. Do not touch the screen, the keyboard, the mouse and wait untilthe screen changes.z If “An unexpected error has occurred…” (or a similar message) is displayed, click [OK].This is not a malfunction.z Wait until the hard disk drive indicator has turned off.4 Perform the touchscreen calibration.z To calibrate the touchscreen, do not use the digitizer pen (included). Use your finger orother objects.z Before performing the calibration, close Tablet PC Input Panel.AClick (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].Click [start] - [Control Panel] - [Other Control Panel Option] - [Touch Settings].B Click [Calibrate].C Touch each of the “+” target marks one by one, and then click [Finished].NOTEz You can also calibrate the digitizer, if you need. (Î Reference Manual “Touch ScreenOperation”)5 Create a new account.A Click [start] - [Control Panel] - [User Accounts] - [Create a new account].CAUTIONz Remember your password. If you forget the password, you cannot use the Windows.Creating a password reset disk beforehand is recommended.First-time OperationNOTEz PC Information ViewerThis computer periodically records the management information of the hard disk, etc. The maximum data volume for eachrecord is 2048 bytes. This information is only used for estimating the cause when the hard disk goes down by anypossibility. They are never sent to outside via network nor used for any other purpose except for the purpose describedthe above.To disable the function, add the check mark for [Disable the automatic save function for management information history]in [Hard Disk Status] of PC Information Viewer, and click [OK].(Î Reference Manual “Checking the Computer’s Usage Status”) Precaution against Starting Up/Shutting Downz Do not do the followingy Connecting or disconnecting the AC adaptory Pressing the power switchy Touching the screen or external mouse