32EN o d i s p l a y a f t e rpowering onAn afterimage appears“Connection timeout” isdisplayed“No server found” isdisplayed“Authentication failed”is displayed“Too many clients” isdisplayed“Illegal data received”o r “ I n i t i a l i m a g ereceiving timeout” isdisplayedSoftware keyboard hasbeen closedAn afterimage appears(i.e., green, red, and bluedots remain on thedisplay) or there are dotsn o t d i s p l a y i n g t h ecorrect colorsTroubleshootingHas the computer or wireless display been set to thepower-saving mode?To resume operation of your computer from the conditionthe power of the display is off (for energy conservationpurposes), touch the screen.If an image is displayed for a prolonged period of time,an afterimage may appear. Set the screensaver.Confirm the IP address, subnet mask, network type,and SSID settings on both the computer and thewireless display.Confirm the operation of the wireless LAN on thecomputer.Put the wireless display close to the computer.Confirm that is on the taskbar.Confirm the IP address of the computer that has beenset on the wireless display.Confirm the password for both the computer and thewireless display.Disconnect the wireless display during operation andreestablish the connection.Confirm whether the network is working properly ornot.Restart the computer.Select [Start] - [Programs] - [Panasonic] - [SoftwareKeyboard].High-precision and advanced technologies are necessaryin the production of color liquid crystal displays (colorLCDs). Therefore, if 0.002% or less of the pictureelements either fail to light or remain constantly lit (thatis, more than 99.998% of elements are functioningproperly), no defect is considered to exist.When a problem occurs, refer to this page. If a problem appears to be related to a softwareapplication, read the software related manual. If you still cannot troubleshoot the problem,contact Panasonic Technical Support.