Panasonic CFVDL02BM - LCD MONITOR Operating Instructions Manual

Also see for Toughbook CF-VDL02BM: Operating instructions

Contents

E3When Car WashingDo not expose the LCD monitor to water or excessive moisture. This could cause electricalshorts, fire or other damage.When ParkedParking in direct sunlight can produce very high temperatures inside your car. Let theinterior of the car cool down before switching the unit on.Do not watch the LCD monitor with the engine off. It will consume battery power andmay prevent the engine from starting.Use Panasonic Technical SupportDo not attempt to disassemble or adjust this precision product. Contact Panasonic TechnicalSupport.For InstallationBe sure to install the LCD monitor in a position that does not obstruct the driver’s vision.If the LCD monitor has been installed for the rear seat passengers, they must be careful toprevent injury by hitting their heads on the LCD monitor in case of an accident.Do not expose the LCD monitor to direct sunlight or excessive heat.Be sure not to install the LCD monitor in a location at which it is exposed to water, hot airsuch as near heater duct, or where it may stepped on.Do not install the LCD monitor in an area where it would obstruct the operation of an airbag.Ask a trained technician to install the unit. Installation and wiring require training andexperience.To be safe, ask the sales outlet where you purchased the unit to perform the installation.When OperatingMake sure the LCD monitor is firmly secured and protected from strong impact, because thismay cause a malfunction or possible fire.Precautions