Panasonic CJ-HDR216A Quick Start Manual

Panasonic CJ-HDR216A Quick Start Manual Manual pdf 18 page image

132 Overview of Navigation and ControlsPlease note the following contents are based on our CJ-HDR416A product. For detailedoperation instruction of other series products, please refer to the User’s Manual included in theresource CD.Before operation, please make sure: You have properly installed HDD and all the cable connections. The provided input power and the device power are matched. Always use the stable current, if necessary UPS is a best alternative measure.2.1 Boot up & Shut Down2.1.1 Boot upBefore the boot up, please make sure: The rated input voltage matches the device power on-off button. Please make sure the powerwire connection is OK. Then click the power on-off button. Always use the stable current, if necessary UPS is a best alternative measure.Please follow the steps listed below to boot up the device. Connect the device to the monitor and then connect a mouse. Connect power cable. Click the power button at the front or rear panel and then boot up the device. After devicebooted up, the system is in multiple-channel display mode by default.NoteAfter start up, there is black screen for a while. This is due to HDD file scanning function whilemonitor search for display source. After file scanning is done, information of "System is initializing,please wait..." will display.2.1.2 Shut DownNote When you see corresponding screen “Saving data…”, do not click power on-off button directly. Do not unplug the power cable or click power on-off button to shut down device directly whendevice is running (especially when it is recording).There are three ways for you to shut down. Main menu (RECOMMENDED): From MAIN MENU -> OPERATION -> SHUTDOWN,select Shut Down button. From power on-off button on the front panel. Press the power on-off button on the DVR frontpanel for more than 3 seconds to shut down the device. From power on-off button on the rear panel.