English23MaintenanceCaution on cleaningYour product is designed and manufactured toensure a minimum of maintenance. Use a drysoft cloth for routine exterior cleaning. Never usebenzine, thinner or other solvents.PesticideAlcoholThinnerBenzineWaxNotes:l If water drops or similar wet substancesget inside the monitor, it may cause amalfunction.l Since there is the possibility of water dropsgetting inside of the unit, do not directly applycleanser to the surface.l Do not scratch the screen with your nails orother hard objects. The resulting scratches ormarks will obscure the images.Cleaning this unitWhen the unit is dirty, wipe the surface of thedisplay using a soft cloth.1 Moisten the soft cloth in dishwashing soapdiluted with water and wring well.2 Wipe lightly. Go over the same surface with adry cloth.If the unit does not work properly, restore theapplication and map of the unit.Restore requirementsl PCl SD Memory Card reader/writerl CN-GP50N (included)l SD Memory Card (included)l USB Cable (included)l DVD-ROM (included)Application RestorePreparationl Install ActiveSync and the driver onto your PCfrom the DVD-ROM.l Connect the unit to the PC with the USB cableand turn on the power of the unit.1 Insert the DVD-ROM in a PC.l The program starts automatically.2 Select [Restore Applications] from the Mainmenu.3 Select [ActiveSync].l After this, install by following theinstructions on the screen.Note:l Do not cancel the operation on the unit or PCor disconnect the connection while data isbeing transferred.Map RestorePreparationl Connect the SD Memory Card reader/writer tothe PC and insert the SD Memory Card.1 Insert the DVD-ROM in a PC.l The program starts automatically.2 Select [Restore Maps] from the Main menu.3 Select [SD Card].l After this, install by following theinstructions on the screen.Restoring23