Panasonic CQ-C1110AN Service Manual

Also see for CQ-C1100VN: Installation instructions Service manual Operating instructions

Contents

Panasonic CQ-C1110AN Service Manual Manual pdf 3 page image

1 ABOUT LEAD FREESOLDER (PbF)Distinction of PbF PCB:PCBs (manufactured) using lead free solder will have a PbFstamp on the PCB.Caution :•••• Pb free solder has a higher melting point than standardsolder; Typically the melting point is 50 - 70°F (30 -40°C) higher. Please use a soldering iron withtemperature control and adjust it to 700 ± 20°F (370 ±10°C). In case of using high temperature soldering iron,please be careful not to heat too long.•••• Pb free solder will tend to splash when heated too high(about 1100°F/600°C)•••• This lead free solder will be used for the products afterserial No. 1,000,001.2 FEATURES•••• Sound System with Spurting Realism(2-channel or 4-channel Power Amplifier)•••• Powerful Heavy Bass(Stereo/Mono Power Amplifier) : CY-M7052EN/CY-M9054EN•••• Radio Data System (RDS)•••• Not support 8 cm discs•••• Not compatible with MP3/WMA3 FUSE•••• Use fuses of the same specified rating (15A).•••• Using different substitutes or fuses with higher rating, orconnecting the unit directly without a fuse, could cause fireor damage to the unit.4 MAINTENANCE•••• Wipe the unit with a soft dry cloth.•••• Never apply volatile liquids such as benzine and thinner toprevent damage.5 NOTES[RADIO BLOCK]Do not align the AM/FM package block. When the packageblock is necessary, it will be supplied already aligned at thefactory.[CD DECK BLOCK]This model has no servo alignment points becausemicrocomputer controls the servo circuit6 DIMENSIONS7 LASER PRODUCTS3CQ-C1120AN / CQ-C1120GN / CQ-C1110AN / CQ-C1110GN / CQ-C1100VN