Panasonic CQ-C3401U Operating Instructions Manual

Panasonic CQ-C3401U Operating Instructions Manual Manual pdf 15 page image

1514ENGLISHCQ-C3401U/C3301UDisplay ChangePress [DISP] to change the display as follows.Note:¡ “– – – –” is displayed when there is no information.¡ “UPDATING” is displayed when channel information isupdated.Channel PresetUp to 6 channels can be stored in each of the XM1, XM2and XM3 band selections.With this operation, a channel can be manually stored inthe preset memory.q Select a band and channel. (a Previous page)w Press and hold one of the preset buttons from [1] to [6]until the display blinks once.Note:¡ New channels overwrite existing saved channel afterthis procedure.Preset Channel Callingq Select a band. (a Previous page)w Press one of the preset buttons from [1] to [6].Note:¡ Because preset memory setting is performed with serv-ice IDs in each channel, a channel may switch to anoth-er that has been stored under the same service ID whencalling up a preset channel. However, broadcasting con-tents are the same as what the stored channel provides.Category SettingPress and hold [BAND] for more than 2 seconds toswitch category mode ON or OFF.(Category mode ON)¡ Enables category switching¡ Enables channel selection only within the catego-ry selected by category switchingCategory Selectionq Press [}] or [{] to display the category name. (CATON)w Press [}] or [{] while the category name is dis-played to select a category. Seeking will start.Direct Channel Selection(Only for remote control unit)Example: Channel number 5q Press [#].w Press [5]e Press [BAND] (SET).Note:¡ The previous screen reappears if a nonexistent channelis selected.¡“OFF AIR” is displayed and the previous screen reap-pears in a few seconds if an off-the-air channel isselected.Artist nameChannel name( ) (Data loading)( ) (Data loading)Song title( ) (Data loading)Category name( ) (Data loading)Clock timeBand/Channel(Default)appears at category mode ON