Panasonic CQ-C5100N Operating Instructions Manual

Contents

Panasonic CQ-C5100N Operating Instructions Manual Manual pdf 6 page image

q Radio ModePress [SOURCE] to select the radio mode.Radio Mode Displayw BandPress [BAND].e Tuning[[]: Higher frequency[]]: Lower frequencyPress and hold [[] or []] for more than 0.5seconds, then release. Seeking will start.Note:¡ For tuning in on only stations whose receiving condi-tions are good in the seeking mode, set LOCAL to ON.(a Page 30)¡ For reducing noise when a receiving FM stereo wave isweak, set FM MONO to ON. (a Page 30)Display ChangePress [DISP] (Display) to change the display as follows.3AM (LW/MW) 3FM (non RDS)*Adjust the clock when “NO CT” appears on the screen.(a Page 9 about Clock setting)111ENGLISHCQ-C5400/C5300/C5100N109ENGLISHCQ-C5400/C5300/C5100NAuto Preset Memory (APM)Automatically save stations with good reception in the pre-set memory.q Select a band. (a Previous page)w Press and hold [BAND] (APM: Auto Preset Memory)for more than 2 seconds.The 6 stations with good reception will be automaticallysaved in the memory under preset number 1 to 6.Once set, the preset stations are sequentially scannedfor 5 seconds each. (scanning)Note:¡ To stop the scanning, press one of the buttons from [1]to [6].¡ Only RDS stations will be saved at default setting (AFON). To select non RDS stations too, set AFOFF. (a Page 13)Manual Preset MemoryManually save a station in preset memory.q Select a band and frequency. (a Previous page)w Press and hold one of the preset buttons from [1] to [6]until the display blinks once.Preset number10Station PresetUp to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.Caution:¡ To ensure safety, never attempt to preset stations while you are driving.Note:¡ New stations overwrite existing saved stations after following this procedure.Preset Station Callingq Select a band. (a Previous page)w Press one of the preset button from [1] to [6].RadioCQ-C5400NCQ-C5400N1 2 3 4 5 61 2 3 4 5 6BANDBAND[SOURCE] [BAND] (APM: Auto Preset Memory)Preset Buttons [1] to [6](Preset station)[]] [[](Tune)(Stereo) indicatorBand FrequencyClock Time *Display OffFrequencyPSClock Time *FrequencyDisplay Off[DISP] (Display)