12 CQ-C7413U/C7113UiPod ControlConnection of the optional direct cable for iPod (CA-DC300U) allows users to operate the iPod including file selection and filesequence change with the buttons on this unit.1 Connect the iPod.2 Press [SRC] (Source) to select the iPodmode. Playback starts.Note: If playback does not start, press [BAND](y / 5).3 Select a desired portion.File Selection[7]: Next file[6]: Beginning of the current fileFor the previous file, press twice.PausePress [BAND] (y / 5).Press again to cancel.Current fileTimelights when the directcable for iPod (CA-DC300U) is connected.Play Mode indicatorslights when each mode is activated.iPod numberOperation FlowPlaying Mode selectioniPod Mode DisplayThe type with which playback data is classified isselectable.1 Press the [}] or [{] button to call upthe play mode selection screen.2 Press the [}] or [{] button to selectthe play mode.: Playback by playlist: Playback by artist: Playback by albumNote: When the []] button is pressed, the regularscreen appears.3 Press the [BAND] button to determinethe selection.4 Press the [}] or [{] button to select aportion to be played.Notes:¡ For selecting ARTIST, the ALBUM selectionscreen appears after selecting an artist name.¡ When the []] button is pressed, the previousscreen appears.5 Press the [BAND] button to determinethe selection.Note: Files without an album name or an artistname are not playable in the playing mode of thealbum or artist display respectively.(iPod 1)(iPod 2)(Random)(Repeat)(Album Random)