Panasonic CQ-C8400 Operating Instructions Manual

Also see for CQ-C8400: Operating instructions

Panasonic CQ-C8400 Operating Instructions Manual Manual pdf 23 page image

50 CQ-C8400/8300/8200/8100U CQ-C8400/8300/8200/8100U 51Insert the CD-R/RW disc containing the datato be used for customizing.≥ The customize menu screen now appears.1 Press ["] or [#] to selectan item to be customized.Moving image dataStill image dataMoving image at power onMoving image at power off2 Press [SET].1 Press ["] or [#] to select a fi le.≥ The maximum number of charactersdisplayed for fi lenames is 16. (The numberof characters in the fi le name may belimited, depending on the type of writingsoftware being used.)2 Press [SET].≥ The previous screen is restored whenBACK is selected using [$] and [SET]is pressed to enter the selection.Customize the Display (Customize function)[%] [$]["][#][SEL] (Select)CQ-C8400U CQ-C8300UWhat the customize function doesThis function enables the user to rewrite the unit’sgraphic pattern, still picture or opening or closingmoving picture into a desired replacement image.Image data which can be changed≥ Data downloaded from Panasonic’s dedicatedweb site≥ Data generated by a PCThe rewriting process is performed using a CD-R/RWdisc on which the replacement data is recorded.The replacement data and the application (IMAGESTUDIO) for creating the replacement data using a PCcan be downloaded from the following web site:http://panasonic.co.jp/pas/en/software/customize/index.html[SOURCE] Note:≥ Do not write data on the CD-R/RW disc if, byso doing, the maximum allowed number of fileslisted below will be exceeded. If fi les are writtenon the CD-R/RW disc in a number which exceedsthe maximum number of files allowed as given inthe table below, it will not be possible to use theexcess fi les.Type of image Extension Max. number offi les allowedMoving image .pfm 10Still image .pfs 15Opening image .pfo 5Closing image .pfe 5≥ Do not write any data except data for customizingon the CD-R/RW disc.≥ Do not change the file extension since doing sowill make it impossible for the image to be writtenproperly.≥ When data is to be recorded on the CD-R/RWdisc, be absolutely sure to record it in the rootdirectory (the highest hierarchical level). Do notwrite the data in a folder.≥ When a CD-RW disc has been inserted into the unit,it may take a few moments for its data to be loaded.≥ GRAPHIC PATTERN A and STILL IMAGE No.1cannot be overwritten.≥ The bigger the fi le, the longer customizing will take(approx. 8 minutes for the largest file with 751KB).≥ When the power is turned off, when the engineis stopped or when the panel is released whilecustomizing is underway, the customizingoperation will be aborted and the data beingrewritten will be lost. In a case like this, proceedwith the customizing operation again.≥ If the corrupted data is selected, “DISPLAY FILEINCOMPLETE” appears.≥ Do not perform any operations while customizingis in progress (step 7-2).≥ To return to the default image, download theapplicable fi le on the web site (page 50) and,using the CD-R/RW disc containing this fi le,perform the rewriting process again.≥ The download service may be temporarily shutdown without warning due to unspecified reasons.Furthermore, it may not always be available in allareas.≥ For further details, refer to Panasonic’s web siteat the address provided below.http://www.panasonic.co.jp/global/1 For a moving image fi le or still image file,press [%] or [$] to select where to savethe fi le.2 Press [SET].1 Press [%] or [$] to select “YES”.2 Press [SET].New data overwrites existing data.1 Press and hold [SEL] for more than4 seconds to exit the customize menu.≥ The customize mode is released, and theCD mode is restored.2 Eject the disc.(Example: GRAPHIC PATTERN)The screen showing what willbe overwritten is previewed.678≥ Customizing is completed successfully,and operation returns to step 4.≥ Operation also returns to step 4 when“No” is selected.≥ In case of customization failure,“CUSTOMIZING FAILED” appears.Customizing procedurePreparation:≥ Have ready the CD-R/RW* disc on which thereplacement data is recorded.* A dedicated writing software and a driveare needed to create the CD-R/RW disc.For further details, refer to Panasonic’s web site(page 51) or the operating instructions of thewriting software.45ENGLISH31ENGLISH32[SET]Customize menu screen∫ GRAPHIC PATTERN∫ STILL IMAGE∫ OPENING MESSAGE∫ CLOSING MESSAGE364975Car AudioSOURCEMUTEPOWERRANDVOL31 2DISPBANDREP6 5SETSEL#SCANMENUNUMBER80 [%] [$]["] [#][SET][SOURCE]Returns to step 5Press and hold [SEL] for more than4 seconds to enter the customize menu.2(When a disc is not in the player)Press [SOURCE] to select the CD mode.1