Panasonic CQ-C8401W Manual 

Contents

Panasonic CQ-C8401W Manual  Manual pdf 5 page image

CQ-C8401W/C7401WEnglish1110PreparationCQ-C8401W/C7401WNote: Adjust the clock when “ADJUST” appears on thedisplay.1 Press [MENU] to display the menudisplay.For using the remote control, hold down [SEL](MENU) for 2 sec. or more.2 Press []] or [[] to display theDISPLAY menu.3 Press [{] to select “CLOCK ADJ”.4 Press [BAND] (SET) to confirm thedisplay.5 Adjust the setting value.[[]: Adjusting minutes[]]: Adjusting hours[}]: Forward[{]: Backward6 Press [BAND] (SET) to confirm theadjustment.Note: For cancellation of clock adjustment, press [DISP].7 Press [MENU].For using the remote control, hold down [SEL](MENU) for 2 sec. or more.When the power is switched on for the first time, ademonstration message appears on the display. Press[DISP] to change to regular mode.1 Set your car's ignition switch to the ACCor On position.The demonstration screen appears.2 Press [DISP: DISPLAY].The demonstration screen is cancelled, and no moreappears.Note: If you would like to turn on the power and makethe demonstration message appear, hold down [SRC](PWR: POWER) for 4 sec. or more.You may need to set the following depending on thedevices to be connected.Using Subwoofer¡ Subwoofer level adjustment (a page 30)¡ Subwoofer low pass filter (a page 30)The following functions are activated when the SecurityFunction is ON. (a page 31)¡ The security indicator lights up when removing theface plate.¡ The alarm sounds and the message appears on thescreen to warn you to remove the face plate at ACCoff.Security IndicatorSRC CQ-C8401WSQPreparationFirst Time Power On(DEMONSTRATION)Remote Control PreparationSecurity Function SettingOther SettingsClock adjustment(CLOCK ADJ: CLOCK ADJUSTMENT)WarningKeep batteries and insulation film out of reach ofinfants. If an infant ingests a battery, please seekimmediate medical attention.Cautions¡Remove and dispose of an old battery immediately.¡Do not disassemble, heat or short a battery. Do notthrow a battery into a fire or water.¡Follow local regulations when disposing of a battery.¡Improper use of a battery may cause overheating, anexplosion or ignition, resulting in injury or a fire.Note: Battery Information:Battery Type: Panasonic lithium battery (CR2025)(Included in the remote control)Battery Life: Approximately 6 months under normal use(at room temperature)Preparation Before Initial UsePull the insulation film outfrom the backside ofremote control gently.Battery Replacementqwq Remove the battery holderwith the remote control unitplaced on a flat surface.q Stick your thumbnail intothe groove, and push theholder in the direction ofthe arrow, and at thesame time.w Pull it out in the directionof the arrow using atough pointed object.23w Put a battery in the casewith (+) side facing up.e Put the case back.Tough pointed objectBack sideInsulation film