12 CQ-C8803N/C8403NiPod ControlConnection of the optional iPod adapter (Direct Cable for iPod) (CA-DC300N) allows users to operate the iPod including file selectionand file sequence change with the buttons on this unit.1 Connect the iPod.2 Press [SRC] (SOURCE) to select theiPod mode. Playback starts.Note: If playback does not start, press [BAND](y / 5).3 Select a desired portion.File Selection[7]: Next file[6]: Beginning of the current fileFor the previous file, press twice.PausePress [BAND] (y / 5).Press again to cancel.The type with which playback data is classified isselectable.1 Press the [}] or [{] button to call upthe play mode selection screen.2 Press the [}] or [{] button to selectthe play mode.: Playback by playlist: Playback by artist: Playback by albumNote: When the []] button is pressed, the regularscreen appears.3 Press the [BAND] button to determinethe selection.4 Press the [}] or [{] button to select aportion to be played.Notes:¡ For selecting ARTIST, the ALBUM selectionscreen appears after selecting an artist name.¡ When the []] button is pressed, the previousscreen appears.5 Press the [BAND] button to determinethe selection.Notes: Files without an album name or an artist nameare not playable in the playing mode of the album orartist display respectively.Operation FlowPlaying Mode selectioniPod Mode Display Current fileTimelights when the iPodconnection module (CA-DC300N) is connected.Play Mode indicatorslights when each mode is activated.iPod number(iPod 1)(iPod 2)(Random)(Repeat)(Album Random)CQ-C8403NAFTADISPPTYCQ-C8403NAFTADISPPTY