CQ-C8405U/C8305U 15 EnglishXM ReceiverOperation Flow1 Press [SOURCE] to select the XMSatellite Radio mode.2 Press [BAND] to select a band.Notes:¡ Connect the optional XM receiver (XMD-1000).¡ To connect the XM receiver (XMD-1000), it isrequired to use an optional extension cord that isproduced by XM exclusively for Panasonic prod-ucts.¡ “RADIO ID” is displayed with channel 0.¡ “UPDATING” is displayed during the update of theidentification code.¡ “LOADING” is displayed during the acquisition ofaudio data or information.3 Select a channel.Channel selection[]] (TUNE): Preceding channel[[] (TUNE): Next channelPreset channel selection[{] (P-SET: Preset): Lower preset channel[}] (P-SET: Preset): Higher preset channelNotes:¡ Direct selection can be executed with [1] to [6]buttons on remote control.¡ A preset station is selectable by turning [VOL]and pressing [PUSH SEL] while the preset listscreen is present on the monitor.¡ The volume is not adjustable while the preset listscreen is present on the monitor.Channel Preset(P-SET: PRESET)Up to 6 channels can be preset in XM1 to XM3respectively.Preset channels can be simply called up by pressing [}](P-SET) or [{] (P-SET).Note: Direct selection can be executed with [1] to [6]buttons on remote control.1 Tune into a channel.2 Hold down [}] or [{] for 2 sec. ormore.3 Turn [VOL] to select a preset number.4 Hold down [PUSH SEL] for 2 sec. ormore, and the channel is written on theselected preset number.Preset number/channel number blinks once.Notes:¡ In step 2, a channel can be registered by holdingdown the numeric button [1] to [6] for 2 sec. or more.¡ To stop presetting channels, press [DISP: DISPLAY].¡ The operation above allows users to replace the cur-rent channel with the channel preset in the selectednumber while selecting a preset channel.¡ The channel may be different between when the chan-nel is preset and when the channel is called upbecause channel preset is performed using Service ID.XM ReceiverMode DisplayArtist name/Song titleBandPreset Number Channel number/nameindicates the satellitereceiver is ready.OPENDISPBANDCQ-C8405UTILT/SET/APMSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER/P-SET/DISCLISTSOURCE PWR/DIMVOLPUSHSEL/SRSWOW