ENGLISHCQ-DF203W CQ-DF203W8 9When DrivingKeep the volume level low enough to be aware ofroad and traffic conditions.When Washing Your CarDo not expose the product, including the speakersand CDs, to water or excessive moisture. This couldcause electrical shorts, fire, or other damage.When ParkedParking in direct sunlight can produce very hightemperatures inside your car. Give the interior achance to cool down before switching the unit on.Use the Proper Power SupplyThis product is designed to operate with a 12 V DC,negative ground battery system.Disc MechanismDo not insert coins or any small objects. Keepscrewdrivers and other metallic objects away fromthe disc mechanism and disc.ServiceThis product is made of precision parts. Do not at-tempt to disassemble or adjust any parts. For re-pair, please consult your nearest authorizedPanasonic service station.For InstallationThis product should be installed in a horizontal po-sition with the front end up at a convenient angle,but not more than 30x.Note:≥ The preset memory is cleared to return to theoriginal factory setting when the power connectoror battery is disconnected.Panasonic welcomes you to our ever growing family of electronic product owners. We know that this prod-uct will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanicalengineering, manufactured with carefully selected components and assembled by people who take pride intheir work. Once you discover the quality, reliability, and value we have built into this product, you too willbe proud to be a member of our family.Use this Product SafelyFeaturesCQ-DF203WCD changerFront speakerFront speaker Rear speakerRear speakerExample:Power amplifier for front andrear speakersLarge-sized Volume ControlAn large-sized rotary volume control that looks likeone belonging to a Hi-Fi audio system is featured.CD Changer ControlYou need connect the optional CD changer unit. Fordetails, refer to the operating instructions on the CDchanger unit.Before Reading these InstructionsThis can only be controlled through themain unit.Operations with neither mark can be performed ei-ther by the main unit or the remote control unit.This can only be controlled through theremote control unit.