Panasonic CQ-DF602U Operating Instructions Manual

Also see for CQDF602U - AUTO RADIO/CD DECK: Operating instructions Operating instructions

Contents

Panasonic CQ-DF602U Operating Instructions Manual Manual pdf 16 page image

ENGLISH24CQ-DF602U 39ENGLISH23CQ-DF602U38Troubleshooting (Continued)≥ Disc is defective.≥ Mechanical trouble.➡Press [OPEN] to open the panel and press [<] (eject). If normal op-eration is not restored, call the store where you purchased the unitor the nearest Servicenter to ask for repairs.Disc is not ejected.No sound from left,right, front or rearspeakers.Left and right balance, or front and rear balance is off on one side.➡Adjust balance/fader setting as appropriate.❐ Sound SettingThe right speaker wire is connected to the left speaker and the leftspeaker wire to the right speaker.➡Connect the speaker wires to the correct ones.Left and right soundsare reversed in stereolistening.Trouble Cause/StepCables are not correctly connected.➡Connect the cables correctly.❐ CD (Continued)Trouble Cause/StepThe first track of a mix mode disc was reproduced. (Mix mode is a for-mat in which data except music is recorded on the first track and musicdata is recorded on other than the first track in a session.)➡Play back music data recorded on other than the first track.Time is counted but nosound comes out.Buttons are invalid foroperation.Battery polarities are reversed.➡Insert the battery correctly.❐ Remote Control UnitWrong the battery.➡Check the battery.The battery has run down.➡Replace the battery.Remote control unit is in the wrong direction.➡Direct the remote control unit at sensor on the front panel.Trouble Cause/StepError Display Messages❐ CDDisplay Cause/StepPower offPower off≥ Disc is dirty, or is upside down.≥ A disc that has data other than CD-DA type is loaded.➡ Check disc.Disc has scratches.➡ Check disc.No operation by some cause.➡If normal operation is not restored, call the store where you pur-chased the unit or the nearest Servicenter to ask for repairs.Power offMounting angle is over 30o.➡Adjust mounting angle to less than 30o.Instable mounting.➡Mount the unit securely with the mounting parts, referring to thesection on installation.Sound skips due to vi-bration.