* Telephone MuteThe sound from the speakers cannot be heard while the tele-phone conversation is in progress.** Navi MuteThe sound from the speakers cannot be heard while the naviga-tion guide is on.Cautions:¡Check the connectors provided on your car (see note on page4 and 5) before connecting the system.¡This unit is designed for use in a car having a 12-volt negativeground battery system.¡To prevent damage to the unit, be sure to follow the connectiondiagram.¡Strip about 5 mm of the lead ends for connection (only non-ISO connector cords).¡Do not insert the power connector into the unit until the wiringis completed.¡Be sure to insulate any exposed wires to prevent short circuit-ing with the car chassis. Bundle all cables, and prevent cableterminals from touching any metal parts.¡This unit can be connected to an optional CD changer (CX-DP9061/DP9060EN, CX-DP88N, CX-DP801/DP803EN or CX-DP601EN) and optional extension cord.¡For details consult your nearest authorized Panasonic Dealer.¡For connection to a CD changer, refer to the operating instruc-tions of the CD changer (CX-DP9061/DP9060EN, CX-DP88N,CX-DP801/803EN or CX-DP601EN).C1 : (Orange)Telephone Mute Lead (*)Connect to the car telephone mute lead.Note: The telephone mute lead is only for connection to the radiomute lead. Output other than telephone will not be mutedNavi Mute Lead (**)To the Navi Mute lead of the Panasonic car navigation system.A8 : Ground Lead (Black)To a clean, bare metallic part of the car chassisA7 : Power Lead (ACC or IGN) (Red)To ACC power, +12V DCA4 : Battery Lead (Yellow)To the car battery, continuous +12 V DCA5 : (Dark blue)Motor Antenna Relay Control Lead(To Motor Antenna) (Max. 500mA)This lead is not intended for use with a switch actuated power antenna.Amp·Relay Control Power LeadThis lead is for connection to a Panasonic power amplifier.A (Black)(Dark blue)Resistor(1kΩ)BATTERY 15AACCA5Fuse(15A)Ground LeadTo a clean, bare metallicpart of the car chassisBattery LeadTo the car battery,continuous +12V DC21CQ-DFX202N16ENGLISH