Panasonic CQ-DFX802N Operating Instructions Manual

Also see for CQ-DFX802N: Service manual

Panasonic CQ-DFX802N Operating Instructions Manual Manual pdf 17 page image

17CQ-DFX802N14ENGLISHUp to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.Caution: To ensure safety, never attempt to preset stations while you are driving.Manual PresetMemoryManually save a station inthe preset memory.q Select a band and frequency (step w and e on the previous page)w Press and hold for more than 2 sec-onds until the preset number blinks.e Press or / [{] or [}] to select a preset number.r Press and hold for more than 2 seconds to memorize.The display blinks once, and a receivingstation is saved in the memory.Note: Frequency setting can be performed even after selecting a presetnumber.Entering numbers directly from the remote controlSelect a band and frequency (step w and e on the previous page)Press and hold one of the preset buttons from [1] to [6] on the remote con-trol for more than 2 seconds.Auto PresetMemoryAutomatically save sta-tions with good receptionin the preset memory.¡The 6 strongest available stations will be automatically saved in the memoryunder preset numbers 1 to 6.¡Once set, the preset stations are sequentially scanned for 5 seconds each.¡To stop the scanning, press or / [{] or [}].(Pressing one of the buttons from [1] to [6] on the remote control also canstop the scanning.)Note: Only RDS stations will be saved at default setting (AF ON). To selectnon RDS stations too, set AF OFF. (a page 17)Preset StationCallingq Select a band (step w on the previous page)w Press to show .e Press or / [{] or [}] to select the preset number fortuning in the preset station.Press one of the preset buttons from [1] to [6] on the remote control.Note: New stations overwrite on existing saved stations after following this procedure.Entering numbers directly from the remote controlStation Presetq Select a band (step w on the previouspage)w Press and hold [BAND] for more than2 seconds.