Panasonic CQ-DFX883N Operating Instructions Manual
Also see for CQ-DFX883N: Operating instructions
English27CQ-DFX883N26 CQ-DFX883N1 Press (MENU) to display the menu dis-play.For using the remote control, hold down (MENU) for2 sec. or more.2 Press (]) or ([) to display the PIC-TURE menu.3 Press (}) or ({) to selecta function to be adjusted.4 Press (SET) to confirm the function.5 Press (}) or ({) to adjustthe setting value.6 Press (SET).7 Press (MENU) to confirm the adjust-ment.For using the remote control, hold down (MENU) for2 sec. or more.MENUSELMENUSELSpectrum analyzer setting: Pattern 1 (Default): Pattern 5: O ffContrast adjustment (Setting range: 1 to 5, Default: Contrast 3): Tilting down view angle: Tilting up view angleDisplay setting: Regular display (Default): Switching the display offNote: Even when switching the display off, pressing any button causes the display acti-vated for 5 seconds.TAPWRCQ-DFX883NMUTESOURCETUNE/TRACKOPENDisplay Setting (PICTURE menu)Adjustment to display on the picture menuIf the display adversely affects yourdriving in a dark place, for exam-ple, you can turn it off completely.Anti-Theft SystemThis unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable. The security indi-cator will blink.Remove the removable face plateq Switch off the power of the unit.w Press (OPEN). The removable face plate will beopened.e Push the face plate to either the right or left.r Pull it out toward you.t Gently press the bottom of the case and open the cover.Place the face plate into the case and take it with you whenyou leave the car.Install Removable Face Plateq Fit the face plate with its right or left hole on one of thepins provided on the main unit.w Fit the other hold on the other pin applying slight pressure.e Move the face plate up and down a few times to make sureit is secure. Then close the front panel and press down theright side of the face plate until it clicks into plate.Security FunctionsFollowing functions are activated when the Security Functionis ON. (a Page 25) Security indicatorIt blinks when the removable face plate is removed fromthe unit. Panel Removal AlarmIt sounds to warn you not to forget to remove the panelbefore leaving your car. Security messageAlso message is displayed.OPEN213 |